Fibre broadband doesn’t technically need a phone line as it requires a specialist type of cable made from glass or plastic.
However if you have FTTC, then it’s likely the connection from your local cabinet to your home will be on a copper line – so it will require a phoneline.
What does an engineer do to install broadband
The engineer will come into your home and disconnect your old hub, so you will briefly be without broadband.
They will fit a new faceplate on your master phone socket, which is where the broadband cable comes into your house.
When positioning your hub, the engineer may need to install new cabling.
Does Bt fibre use Virgin cable
BT fibre is completely separate to Virgin fibre. There is no ‘switchover’, a New bt service would be provided and the Virgin service ceased.
How do I know if my internet is fiber or DSL
Run a quick speed test on your computer, and measure the results here: A speed of 56 kbit/s or less means you have dial-up internet.
Speeds of up to 100 Mbps are typically DSL, cable or fixed wireless. A speed result of 200-1,000 Mbps means you have either cable or fiber-optic internet service.
How is FTTC installed
In an FTTC network, fibre is installed from the carrier network to the distribution point.
This is why FTTC is known as “to the cabinet” (the street level cabinet or distribution point).
The FTTC product uses high-speed fibre to the street level cabinet but then uses copper to reach the business.
How long does it take to get broadband in a new build
It usually takes around two weeks’ to set up internet in a new home.
If the property already has a working broadband line installed then getting internet access could be as simple as plugging in your new router when you arrive.
Does FTTP require digging
The only options to get FTTP into the property was dig up outside of the homeowner lifts up the floors blocking access to the original duct entry point.
Why do I need an engineer for broadband
The engineer will check the connection, and perhaps provide a modem or router, which may also be tested.
Some providers will send you the router before the visit. Once complete, you will be asked to sign for the work and to confirm everything is working.
How do I know if I have FTTP
To find out if you can get high-speed fibre broadband via FTTP, use an FTTP checking tool.
You’ll find these on an ISP’s website to let you quickly check if FTTP has been rolled out to your area.
If not, FTTC is probably the best alternative (unless you live in rural areas).
How long does it take for internet to be installed
Standard installations take around two to four hours.
Do I need a technician to install my internet
You can install internet by yourself if your home is wired properly for internet service and if your provider has a self-installation option available.
Self-installation isn’t always an option—some providers require a professional to install your internet service because of wiring issues and other complications.
How long does FTTP take to activate
FTTP installations are more complex than traditional broadband installations, lead times to completion vary, but are typically about 4 weeks.
Your ISP will provide you with appointment dates in advance.
How much is Fttp UK installation
Current FTTP Build Costs The costs range from an eye watering £39,000 to a low of £4,000.
The average cost over the sample set was £22,300.
Where is ONT installed
The Optical Network Terminal (ONT) converts the optical signal coming through the fiber into separate signals for TV, voice, and data.
The ONT is installed with Fios service on either the outside or inside of your home (garage, basement, closet, etc).
Why does it take 2 weeks to activate broadband
Two weeks is about right for a new residential provision. Business lines are usually quicker.
Charging will not start until your service is activated. Advance charges for provision of service, and initial line rental is normal.
How do I install broadband?
- Connect the router
- Power up the router and switch it on
- Check the connection
Do you need to drill a hole for broadband
The engineer will then install further cables to entry points inside your home, which will require them to drill a small hole in your wall.
They’ll then complete the setup to ensure it’s all up and running as you expect.
The process should take between 30 minutes and two hours.
What does FTTP stand for
FTTP and FTTH are two different abbreviations for the same thing. FTTP stands for ‘fibre to the premises’ and FTTH stands for ‘fibre to the home’.
They are used interchangeably, along with ‘Ultrafast’ and ‘Full Fibre’.
What is the difference between FTTP and FTTC
FTTP is full fibre broadband that gives you a dedicated connection that runs directly from the exchange to your property.
FTTC is part fibre broadband that uses fibre optic cables to the main exchange but then uses old copper wires to connect to properties.
Can I install a BT master socket
Re: master socket installation If the main line comes in overhead, then Openreach can be asked to re-locate the master socket to where you want it.
If it comes in underground, then you would need to provide access for Openreach to fit a master socket.
You can then run your own extension from that master socket.
How long does it take for a phone line to be activated
Activation times vary by carrier and whether you’re keeping your number. Typically, the process only takes around 10 minutes.
If you’re transferring your number from a previous carrier, keep your old phone and your new one close by – just in case.
Did EE actually land a plane
The latest brand campaign for EE sees a plane landed over its Full Fibre Max broadband from a UK family home, demonstrating the network’s reliability in the process.
References
https://www.allconnect.com/blog/find-internet-connection-type
https://www.plt.com.my/wp-content/uploads/2018/04/FWS_E_PLT-2.pdf
https://www.bt.com/help/broadband/getting-set-up/how-to-set-up/engineer-installation
https://www.letsbemates.com.au/mate/nbn-connection-types/
https://www.theguardian.com/technology/askjack/2019/nov/14/do-i-need-fibre-broadband-internet-adsl
